Coolbreeze Hydraulic Drain Valve

This Coolbreeze Hydraulic Drain Valve, part number SP2064, is a genuine replacement part designed for Coolbreeze evaporative air conditioners. It ensures your system drains correctly, preventing water from sitting in the pan when not in use. Maintaining a functional drain valve is key for hygiene and preventing wear on your cooler's components.

Anyone who's battled with a stuck or leaking drain valve knows the headache it causes, especially when you're trying to get a cooler ready for a scorching Australian summer. Getting this right saves a lot of hassle down the line.

Best For

• Replacing worn or faulty drain valves in Coolbreeze evaporative coolers.
• Routine maintenance and servicing of Coolbreeze evaporative systems.
• HVAC service technicians and competent DIY owners.

Compatibility

This hydraulic drain valve (SP2064) is specifically designed as a genuine spare part for Coolbreeze evaporative air conditioning units. It features a mushroom style with a washer for a secure fit.

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Coolbreeze replacement part.
• Hydraulic operation for reliable draining.
• Mushroom style design ensures effective water discharge.
• Includes essential washer for a watertight seal.
• Designed for the specific needs of evaporative cooler systems.

What's in the Box

• 1 x Coolbreeze Hydraulic Drain Valve (Mushroom Style)
• 1 x Washer

Using It on the Job

1. Safety First: Always isolate and lock out power to the evaporative cooler at the mains before starting any work.
2. Drain Unit: Ensure all water has been drained from the cooler's reservoir.
3. Remove Old Valve: Carefully detach and remove the old drain valve assembly.
4. Clean Area: Thoroughly clean the mounting surface where the new valve will sit to ensure a proper seal.
5. Install New Valve: Fit the new SP2064 valve, making sure the included washer is correctly positioned and seated for a watertight seal.
6. Test for Leaks: Refill the cooler and restore power. Observe the drain valve area closely for any signs of leaks before completing the job.

Limitations & Safety Notes

• Always isolate power to the evaporative cooler before conducting any maintenance or repairs.
• Ensure this SP2064 valve is the correct part number for your specific Coolbreeze evaporative cooler model.
• This component is designed for evaporative cooler water management; it is not for use in pressurised refrigerant circuits.
• Regularly inspect your cooler's components for wear and tear, especially before seasonal startup.

Before you bolt everything back together, always give the old valve seat a good clean to make sure no crud will stop your new SP2064 from sealing properly. A little silicone grease on the washer can help too.

Pair With

Pair with other Coolbreeze spare parts, evaporative cooler filter pads, or general cleaning supplies for a complete maintenance service.